we load the secondary stage u-boot image from NAND to
system memory by nand_load, but we did not flush d-cache
to memory, not invalidate i-cache before we jump to RAM.
when the system is cache enable and the TLB/page attribute
of system memory is cacheable, it will cause issue.
- 83xx family is using the d-cache lock, so all of d-cache
access is cache-inhibited. so you can't see the issue.
- 85xx family is using d-cache, i-cache enable, partial
cache lock. you will see the issue.
The patch fix the cache issue.
Signed-off-by: Dave Liu <[EMAIL PROTECTED]>
---
Stefan,
I'm not familiar with ppc4xx, could you workout one
patch for nand_boot.c?
Thanks,
Dave
nand_spl/board/freescale/mpc8313erdb/Makefile | 6 +++++-
nand_spl/nand_boot_fsl_elbc.c | 5 +++++
2 files changed, 10 insertions(+), 1 deletions(-)
diff --git a/nand_spl/board/freescale/mpc8313erdb/Makefile
b/nand_spl/board/freescale/mpc8313erdb/Makefile
index 3da1b1f..1a8f6ff 100644
--- a/nand_spl/board/freescale/mpc8313erdb/Makefile
+++ b/nand_spl/board/freescale/mpc8313erdb/Makefile
@@ -34,7 +34,8 @@ AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
SOBJS = start.o ticks.o
-COBJS = nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o nand_init.o time.o
+COBJS = nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o nand_init.o \
+ time.o cache.o
SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -79,6 +80,9 @@ $(obj)ns16550.c:
$(obj)nand_init.c:
ln -sf $(SRCTREE)/cpu/mpc83xx/nand_init.c $(obj)nand_init.c
+$(obj)cache.c:
+ ln -sf $(SRCTREE)/lib_ppc/cache.c $(obj)cache.c
+
$(obj)time.c:
ln -sf $(SRCTREE)/lib_ppc/time.c $(obj)time.c
diff --git a/nand_spl/nand_boot_fsl_elbc.c b/nand_spl/nand_boot_fsl_elbc.c
index 4a961ea..0d0c44e 100644
--- a/nand_spl/nand_boot_fsl_elbc.c
+++ b/nand_spl/nand_boot_fsl_elbc.c
@@ -143,6 +143,11 @@ void nand_boot(void)
* Jump to U-Boot image
*/
puts("transfering control\n");
+ /*
+ * Clean d-cache and invalidate i-cache, to
+ * make sure that no stale data is executed.
+ */
+ flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE);
uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
uboot();
}
--
1.5.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
