Jon Loeliger schrieb: > On Mon, 2008-12-08 at 18:02 +0100, Andre Schwarz wrote: > >> Kim, >> >> I'd like to change my DDR setup code since it looks like my computed >> values are not perfectly stable on our 8343 based board. >> >> This implies using a fake SPD and the related code to set up the controller. >> >> Is the "new" common FSL DDR setup code (cpu/mpc8xxx/ddr/*) stable for >> 83xx or shall I stick to cpu/mpc83xx/spd_sdram.c for a while ? >> > > The new, common DDR code in use by the FSL boards does not > yet cover the 83xx family, though the plan is to eventually > do so. > > Patches in that direction, are, naturally, welcome... :-) > > jdl > > > Is anybody working on this ? The spd_sdram code lacks support for 3 bank adress bits and various termination schemes which are essential for tiny boards with soldered memory.
Of course I could contribute for the 8343. But I don't now about the "others" (85xx/86x) in detail and don't want to scatter #ifdefs all over the code ... regards, André MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot