Hi All,
I am using a custom powerpc board with MPC8265 ( 66/200/300 Mhz) ,
32MB of SDRAM ( 0x00000000 - 0x01FFFFFF) and
8 MB of Flash Simm ( 0xFF800000 - 0xFFFFFFFF) .
I am modifying the MPC8260ads configurations in u-boot to match my board but I
don't
see any messages being printed on the serial console. Can anyone please let me
know what I need to change in u-boot to initialize the console properly. Do I
need to go into the routine board_early_init_f for MPC8265 ?
Please let me know
Thanks in advance
Best Regards
Jyotshna
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
