dinny said the following on 01/07/2009 03:37 AM: > >From the cpu aspect, it should be the most familiar one with your > CPUs. And try to learn more on your on-board peripherals and devices. > Probably you can find some boards that have similar device > configuration, thus you can reuse some codes, esp. in case that you > should be not familiar with these devices. > > One thing that might be different would be mmu config I would suspect.. you may want to refer to [2] instead of omapzoom as [2] is closer to mainline u-boot. you can find cortex_a8 documentation in [1]. TI OMAP3 documentation is publically available too, if you would like to see what is happening in the code..
Regards, Nishanth Menon Ref: [1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0344e/index.html - there is a link to A9 also nearby.. [2] http://www.sakoman.net/cgi-bin/gitweb.cgi?p=u-boot-arm.git;a=shortlog;h=refs/heads/omap3-dev _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot