This patch adds the config option CONFIG_EHCI_HCD_INIT_AFTER_RESET to call ehci_hcd_init() again after ehci_reset() is executed. This is needed for the upcoming VCT EHCI support which needs to re-init the hcd part again after the EHCI CMD_RESET is executed.
Signed-off-by: Stefan Roese <[email protected]> --- drivers/usb/usb_ehci_core.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-) diff --git a/drivers/usb/usb_ehci_core.c b/drivers/usb/usb_ehci_core.c index 28962fa..2f38f33 100644 --- a/drivers/usb/usb_ehci_core.c +++ b/drivers/usb/usb_ehci_core.c @@ -691,6 +691,11 @@ int usb_lowlevel_init(void) if (ehci_reset() != 0) return -1; +#if defined(CONFIG_EHCI_HCD_INIT_AFTER_RESET) + if (ehci_hcd_init() != 0) + return -1; +#endif + /* Set head of reclaim list */ memset(&qh_list, 0, sizeof(qh_list)); qh_list.qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH); -- 1.6.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
