Dear Mike Frysinger,
In message <1233596548-5716-1-git-send-email-vap...@gentoo.org> you wrote:
> (note that the on-going enetaddr patch has been dropped)
>
> The following changes since commit 6c6e042ab3bbfb5428e4cdeb38fa27728c63afdd:
> Wolfgang Denk (1):
> Merge branch 'master' of git://git.denx.de/u-boot-arm
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-blackfin.git master
>
> Cliff Cai (1):
> Blackfin: add driver for on-chip MMC/SD controller
>
> Mike Frysinger (24):
> Blackfin: bfin_mac: set MDCDIV based on SCLK
> Blackfin: bfin_mac: cleanup MII/PHY functions
> Blackfin: bfin_mac: respect CONFIG_PHY_{ADDR,CLOCK_FREQ}
> Blackfin: bfin_mac: use common debug()
> Blackfin: bfin_mac: convert CONFIG_BFIN_MAC_RMII to CONFIG_RMII
> Blackfin: bfin_mac: cleanup pointer/casts for aliasing issues
> Blackfin: only build post code when CONFIG_POST
> Blackfin: add driver for on-chip SPI controller
> Blackfin: dont check baud if it wont actually get used
> Blackfin: enable --gc-sections
> Blackfin: cache core/system clock values
> Blackfin: setup bi_enetaddr for single nets
> Blackfin: rewrite cache handling functions
> Blackfin: dma_memcpy(): fix random failures
> Blackfin: only flag L1 instruction for DMA memcpy
> Blackfin: use 8/16/32 bit transfer widths in dma_memcpy()
> Blackfin: fix up EBIU defines
> Blackfin: build with -mno-fdpic
> Blackfin: add driver for on-chip NAND controller
> Blackfin: add port I bits
> Blackfin: update asm-blackfin/posix_types.h to latest Linux version
> Blackfin: set default CONFIG_ENV_SPI_CS based on bootrom
> Blackfin: output booting source when booting
> Blackfin: add port muxing for BF51x SPI
>
> Sonic Zhang (1):
> Blackfin: add driver for on-chip ATAPI controller
>
> blackfin_config.mk | 5 +-
> board/bf537-stamp/spi_flash.c | 20 +-
> cpu/blackfin/Makefile | 1 +
> cpu/blackfin/cache.S | 118 ++-
> cpu/blackfin/initcode.c | 6 +-
> drivers/block/Makefile | 1 +
> drivers/block/pata_bfin.c | 1201
> ++++++++++++++++++++++++++
> drivers/block/pata_bfin.h | 173 ++++
> drivers/mmc/Makefile | 1 +
> drivers/mmc/bfin_sdh.c | 546 ++++++++++++
> drivers/mmc/bfin_sdh.h | 59 ++
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/bfin_nand.c | 385 +++++++++
> drivers/net/bfin_mac.c | 380 ++++-----
> drivers/net/bfin_mac.h | 31 +-
> drivers/spi/Makefile | 1 +
> drivers/spi/bfin_spi.c | 343 ++++++++
> include/asm-blackfin/blackfin-config-post.h | 5 +
> include/asm-blackfin/blackfin-config-pre.h | 22 +
> include/asm-blackfin/blackfin_local.h | 20 +-
> include/asm-blackfin/mach-bf548/ports.h | 20 +-
> include/asm-blackfin/mach-common/bits/ebiu.h | 4 +-
> include/asm-blackfin/mach-common/bits/pata.h | 220 +++++
> include/asm-blackfin/mach-common/bits/sdh.h | 122 +++
> include/asm-blackfin/mmc.h | 1 +
> include/asm-blackfin/posix_types.h | 20 +-
> lib_blackfin/Makefile | 4 +-
> lib_blackfin/board.c | 61 +-
> lib_blackfin/cache.c | 18 +-
> lib_blackfin/clocks.c | 77 ++
> lib_blackfin/post.c | 4 -
> lib_blackfin/string.c | 38 +-
> lib_blackfin/tests.c | 3 -
> 33 files changed, 3528 insertions(+), 383 deletions(-)
> create mode 100644 drivers/block/pata_bfin.c
> create mode 100644 drivers/block/pata_bfin.h
> create mode 100644 drivers/mmc/bfin_sdh.c
> create mode 100644 drivers/mmc/bfin_sdh.h
> create mode 100644 drivers/mtd/nand/bfin_nand.c
> create mode 100644 drivers/spi/bfin_spi.c
> create mode 100644 include/asm-blackfin/mach-common/bits/pata.h
> create mode 100644 include/asm-blackfin/mach-common/bits/sdh.h
> create mode 100644 include/asm-blackfin/mmc.h
> create mode 100644 lib_blackfin/clocks.c
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
Nothing is easier than to denounce the evildoer; nothing is more
difficult than to understand him. - Fyodor Dostoevski
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
