Move the default SPI CS that we boot from into common code so that it can be used in other SPI drivers and environment settings.
Signed-off-by: Mike Frysinger <vap...@gentoo.org> --- board/bf537-stamp/spi_flash.c | 8 +------- include/asm-blackfin/blackfin-config-pre.h | 9 +++++++++ 2 files changed, 10 insertions(+), 7 deletions(-) diff --git a/board/bf537-stamp/spi_flash.c b/board/bf537-stamp/spi_flash.c index b147ce7..7b764b4 100644 --- a/board/bf537-stamp/spi_flash.c +++ b/board/bf537-stamp/spi_flash.c @@ -180,13 +180,7 @@ static struct manufacturer_info flash_manufacturers[] = { * BF51x, BF533, BF561: SSEL2 */ #ifndef CONFIG_SPI_FLASH_SSEL -# if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \ - defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__) || \ - defined(__ADSPBF51x__) -# define CONFIG_SPI_FLASH_SSEL 2 -# else -# define CONFIG_SPI_FLASH_SSEL 1 -# endif +# define CONFIG_SPI_FLASH_SSEL BFIN_BOOT_SPI_SSEL #endif #define SSEL_MASK (1 << CONFIG_SPI_FLASH_SSEL) diff --git a/include/asm-blackfin/blackfin-config-pre.h b/include/asm-blackfin/blackfin-config-pre.h index a1fae5c..9df01ad 100644 --- a/include/asm-blackfin/blackfin-config-pre.h +++ b/include/asm-blackfin/blackfin-config-pre.h @@ -60,4 +60,13 @@ static inline const char *get_bfin_boot_mode(int bfin_boot) } #endif +/* Define the default SPI CS used when booting out of SPI */ +#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \ + defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__) || \ + defined(__ADSPBF51x__) +# define BFIN_BOOT_SPI_SSEL 2 +#else +# define BFIN_BOOT_SPI_SSEL 1 +#endif + #endif -- 1.6.1.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot