On Wed, Feb 4, 2009 at 3:14 PM, Peter Tyser <pty...@xes-inc.com> wrote: > Previously, waiting for auto-negotiation would only occur if a valid > link had been detected. Problems arose when attempting to use a > tsec immediately after bootup but before link was achieved, eg: > => dhcp > Auto-neg error, defaulting to 10BT/HD > eTSEC1: No link. > Auto-neg error, defaulting to 10BT/HD > eTSEC2: No link. > =>
Hmmm....I made that change for a reason. Waiting for autonegotiation to finish on a tsec with no link was quite tiresome. If you've hooked up the 4th tsec, and try to boot, you end up waiting for *three* tsecs to timeout. If dhcp fails because the link isn't up you can always try again, or add a delay before dhcp starts so that the link is up. I'm open to other suggestions, but I really don't want to go back to the old behavior. Andy _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
