On Sunday 08 February 2009, Alessandro Rubini wrote: > From: Alessandro Rubini <rub...@unipv.it> > > This driver implements the ECC algorithm described in > the CPU data sheet and uses the OOB layout chosen in > already-released development systems (shipped with a custom-made > u-boot 1.3.1). > > Signed-off-by: Alessandro Rubini <rub...@unipv.it> > Acked-by: Andrea Gallo <andrea.ga...@stnwireless.com> > --- > > Changes from V2: added nomadik.h, moved all register addresses there, > fixed what J.C. suggested. > > cpu/arm926ejs/nomadik/Makefile | 9 +- > cpu/arm926ejs/nomadik/nand.c | > 221++++++++++++++++++++++++++++++++++++++++
This driver should go into drivers/mtd/nand instead. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot