Signed-off-by: Mike Frysinger <vap...@gentoo.org>
---
include/asm-blackfin/mach-common/bits/lockbox.h | 70 +++++++++++-----------
1 files changed, 35 insertions(+), 35 deletions(-)
diff --git a/include/asm-blackfin/mach-common/bits/lockbox.h
b/include/asm-blackfin/mach-common/bits/lockbox.h
index 8b696f3..77f849e 100644
--- a/include/asm-blackfin/mach-common/bits/lockbox.h
+++ b/include/asm-blackfin/mach-common/bits/lockbox.h
@@ -11,52 +11,52 @@
/* SESR argument structure. Expected to reside at 0xFF900018. */
typedef struct SESR_args {
- unsigned short usFlags; /* security firmware flags
*/
- unsigned short usIRQMask; /* interrupt mask
*/
- unsigned long ulMessageSize; /* message length in bytes
*/
- unsigned long ulSFEntryPoint; /* entry point of secure function
*/
- unsigned long ulMessagePtr; /* pointer to the buffer containing
*/
- /* the digital signature and message
*/
- unsigned long ulReserved1; /* reserved
*/
- unsigned long ulReserved2; /* reserved
*/
+ unsigned short usFlags; /* security firmware flags
*/
+ unsigned short usIRQMask; /* interrupt mask
*/
+ unsigned long ulMessageSize; /* message length in bytes
*/
+ unsigned long ulSFEntryPoint; /* entry point of secure function
*/
+ unsigned long ulMessagePtr; /* pointer to the buffer containing
+ the digital signature and
message */
+ unsigned long ulReserved1; /* reserved
*/
+ unsigned long ulReserved2; /* reserved
*/
} tSESR_args;
/* Secure Entry Service Routine */
-void (* const sesr)(void) = (void *)_BOOTROM_SESR;
+static void (* const sesr)(void) = (void *)_BOOTROM_SESR;
#endif
-/* SESR flags argument bitfields */
-#define SESR_FLAGS_STAY_AT_NMI 0x0000
-#define SESR_FLAGS_DROP_BELOW_NMI 0x0001
-#define SESR_FLAGS_NO_SF_DMA 0x0000
-#define SESR_FLAGS_DMA_SF_TO_RUN_DEST 0x0002
-#define SESR_FLAGS_USE_ADI_PUB_KEY 0x0000
-#define SESR_FLAGS_USE_CUST_PUB_KEY 0x0100
+/* SESR flags argument bitfields */
+#define SESR_FLAGS_STAY_AT_NMI 0x0000
+#define SESR_FLAGS_DROP_BELOW_NMI 0x0001
+#define SESR_FLAGS_NO_SF_DMA 0x0000
+#define SESR_FLAGS_DMA_SF_TO_RUN_DEST 0x0002
+#define SESR_FLAGS_USE_ADI_PUB_KEY 0x0000
+#define SESR_FLAGS_USE_CUST_PUB_KEY 0x0100
/* Bit masks for SECURE_SYSSWT */
-#define EMUDABL 0x00000001 /* Emulation Disable */
-#define RSTDABL 0x00000002 /* Reset Disable */
-#define L1IDABL 0x0000001c /* L1 Instruction Memory
Disable */
-#define L1DADABL 0x000000e0 /* L1 Data Bank A Memory Disable */
-#define L1DBDABL 0x00000700 /* L1 Data Bank B Memory Disable */
-#define DMA0OVR 0x00000800 /* DMA0 Memory Access
Override */
-#define DMA1OVR 0x00001000 /* DMA1 Memory Access
Override */
-#define EMUOVR 0x00004000 /* Emulation Override */
-#define OTPSEN 0x00008000 /* OTP Secrets Enable */
-#define L2DABL 0x00070000 /* L2 Memory Disable */
+#define EMUDABL 0x00000001 /* Emulation Disable */
+#define RSTDABL 0x00000002 /* Reset Disable */
+#define L1IDABL 0x0000001c /* L1 Instruction Memory Disable
*/
+#define L1DADABL 0x000000e0 /* L1 Data Bank A Memory Disable
*/
+#define L1DBDABL 0x00000700 /* L1 Data Bank B Memory Disable
*/
+#define DMA0OVR 0x00000800 /* DMA0 Memory Access Override */
+#define DMA1OVR 0x00001000 /* DMA1 Memory Access Override */
+#define EMUOVR 0x00004000 /* Emulation Override */
+#define OTPSEN 0x00008000 /* OTP Secrets Enable */
+#define L2DABL 0x00070000 /* L2 Memory Disable */
/* Bit masks for SECURE_CONTROL */
-#define SECURE0 0x0001 /* SECURE 0 */
-#define SECURE1 0x0002 /* SECURE 1 */
-#define SECURE2 0x0004 /* SECURE 2 */
-#define SECURE3 0x0008 /* SECURE 3 */
+#define SECURE0 0x0001 /* SECURE 0 */
+#define SECURE1 0x0002 /* SECURE 1 */
+#define SECURE2 0x0004 /* SECURE 2 */
+#define SECURE3 0x0008 /* SECURE 3 */
/* Bit masks for SECURE_STATUS */
-#define SECMODE 0x0003 /* Secured Mode Control
State */
-#define NMI 0x0004 /* Non Maskable Interrupt */
-#define AFVALID 0x0008 /* Authentication Firmware
Valid */
-#define AFEXIT 0x0010 /* Authentication Firmware Exit */
-#define SECSTAT 0x00e0 /* Secure Status */
+#define SECMODE 0x0003 /* Secured Mode Control State */
+#define NMI 0x0004 /* Non Maskable Interrupt */
+#define AFVALID 0x0008 /* Authentication Firmware Valid
*/
+#define AFEXIT 0x0010 /* Authentication Firmware Exit */
+#define SECSTAT 0x00e0 /* Secure Status */
#endif
--
1.6.1.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
