Hi All, I am trying to enable POST tests on the canyonlands board.I have added the following to the canyonlands.h header file.
/* POST support */ #define CONFIG_POST (CFG_POST_CACHE | \ CFG_POST_CPU | \ CFG_POST_ETHER | \ CFG_POST_I2C | \ CFG_POST_MEMORY | \ CFG_POST_UART) /* Define here the base-addresses of the UARTs to test in POST */ #define CFG_POST_UART_TABLE {UART0_BASE, UART1_BASE} #define CONFIG_LOGBUFFER #define CFG_POST_CACHE_ADDR 0x00800000 /* free virtual address */ #define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ With the image I built after this changes, I tried to execute the "diag" command on the u-boot prompt. It shows only the "rtc" test. What else should I add to get other tests under the diag command ? Regards, Afzal http://www.mindtree.com/email/disclaimer.html _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot