Dear Afzal Nadirshah, In message <174230991e95d743b0c91df471ef44e8434329c...@mtw02msg02.mindtree.com> you wrote: > > I have compiled u-boot-nand.bin for the canyonlands board.I flashed > this image onto the nand flash and > did a boot from NAND.I interrupted the u-boot and tried to do a tftp. But i > get this error : No ethernet found. > Could someone tell me where to enable ethernet in the u-boot source > code?
You probably forgot to set a MAC address (ethaddr environment variable). Set one, then "saveenv", then "reset", then try again. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "Data is a lot like humans: It is born. Matures. Gets married to other data, divorced. Gets old. One thing that it doesn't do is die. It has to be killed." - Arthur Miller _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot