On Wed, Feb 25, 2009 at 03:04:56PM -0600, John Jeffers wrote: > In "~/u-boot-v2/board/pcm038/env/config > (and in most other boards in v2) > > the following is found: > /****+ > autoboot_timeout=3 > > nfsroot="/ptx/work/octopus/rsc/svn/oselas/bsp/phytec/phyCORE-i.MX27/OSELAS.BSP-Phytec-phyCORE-i.MX27-trunk/root" > > bootargs="console=ttymxc0,115200" > -****/ > I believe this causes certain scripting in ptxdist to fail "~>ptxdist > test setenv<cr>" since it is setting up uboot configuration for Robert > S.'s machine. It does not actually "hurt" u-boot-v2 rc7 since the > knowledgeable user will make this go away for his board.
The automatic setup scripts in OSELAS.BSPs using this board should do the right thing, the 'test setenv' script will push a well defined environment into the box. > Likely the community would be better served if there was a comment as > the following: > > #really make sure this points to the nfs root source. Assuming the BSP > was at the user home. ~> > nfsroot="/OSELAS.BSP-Phytec-phyCORE-8/projectroot" > > It may be useful to fix this as a question to the user.// Yes, good idea, please send a proper patch that fixes all of these issues. rsc -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot