> > How can I tell u-boot to boot with the ramboot= definition instead of > > mmcboot= ? > > > > - Grant > > You need to change environmental variable bootcmd > > setenv bootcmd ramboot > saveenv > run bootcmd > > or simpler: > > Stop u-boot -> and access prompt > > then, > > run ramboot
Hi Lucasz, that didn't work for me and I think it's because of the variables set by 'make am335x_evm_defconfig'. It seems like there are a set of standard u-boot commands and a higher level of variables set by 'make am335x_evm_defconfig' which appear in include/configs/am335x_evm.h and prevent you from using the standard u-boot commands in uEnv.txt. For example, even after adding the following to the top of my uEnv.txt: setenv bootcmd ramboot saveenv I still get: "Booting from mmc ..." I'm struggling to figure out how to use the framework provided by 'make am335x_evm_defconfig' in uEnv.txt. Can you point me to info on how to do that? - Grant
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot