[U-Boot] [PATCH] serial_pl011: Set RTS during initialization

[Rob Herring]

From: Joshua Housh <joshua.ho...@calxeda.com>

If the pl011 is connected to another device which has hardware
flow-control on, characters are never received by the pl011.
Asserting RTS when flow-control is off will have no effect.

This is in line with how Linux behaves.

Signed-off-by: Joshua Housh <joshua.ho...@calxeda.com>
---
 drivers/serial/serial_pl01x.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index b331be7..dfdba9f 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -163,8 +163,8 @@ static int pl01x_serial_init(void)
        }
 #endif
        /* Finally, enable the UART */
-       writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE,
-              &regs->pl011_cr);
+       writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE |
+              UART_PL011_CR_RTS, &regs->pl011_cr);
 
        return 0;
 }
-- 
1.7.10.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot