Hi All,
I would like to partition the NAND flash on a canyonlands board. As per my
understanding, the partitioning is done using the "add_mtd_partitions" function
in the file "drivers/mtd/mtdpart.c".
I also understand that the information about a partition is stored in the
structure : "struct mtd_partition" .
I could not find out where this structure is getting populated in the u-boot
code.
Could somebody point out the file in which these partitions are created? I am
also interested in knowing the file in which the different start / end
addresses for these partitions are defined.
On DaVinci EVM's I have found something like this when the u-boot comes up :
Creating 5 MTD partitions on "nand_davinci.0":
0x00000000-0x00060000 : "bootloader"
0x00060000-0x00200000 : "params"
0x00200000-0x00400000 : "kernel"
0x00400000-0x01800000 : "filesystem"
0x01800000-0x02000000 : "data"
My aim is to add more such partitions on the NAND flash on my board. Any
information regarding partitioning the flash is highly appreciated.
Thanks in advance.
Regards,
Afzal Nadirshah
http://www.mindtree.com/email/disclaimer.html
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
