This patch adds mtd device support for smi devices

Signed-off-by: Vipin Kumar <vipin.ku...@st.com>
---
 drivers/mtd/st_smi.c | 167 ++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 165 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/st_smi.c b/drivers/mtd/st_smi.c
index 0e529a4..4d1a6bd 100644
--- a/drivers/mtd/st_smi.c
+++ b/drivers/mtd/st_smi.c
@@ -24,6 +24,7 @@
 #include <common.h>
 #include <flash.h>
 #include <linux/err.h>
+#include <linux/mtd/mtd.h>
 #include <linux/mtd/st_smi.h>
 
 #include <asm/io.h>
@@ -37,6 +38,14 @@ static ulong bank_base[CONFIG_SYS_MAX_FLASH_BANKS] =
     CONFIG_SYS_FLASH_ADDR_BASE;
 flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
+#if defined(CONFIG_MTD_DEVICE)
+/* MTD interface for SMI devices */
+static struct mtd_info smi_mtd_info[CONFIG_SYS_MAX_FLASH_BANKS];
+static char smi_mtd_names[CONFIG_SYS_MAX_FLASH_BANKS][16];
+
+static int smi_mtd_init(void);
+#endif
+
 /* data structure to maintain flash ids from different vendors */
 struct flash_device {
        char *name;
@@ -482,7 +491,9 @@ unsigned long flash_init(void)
 {
        unsigned long size = 0;
        int i, j;
-
+#if defined(CONFIG_MTD_DEVICE)
+       int error;
+#endif
        smi_init();
 
        for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
@@ -498,6 +509,12 @@ unsigned long flash_init(void)
 
        }
 
+#if defined(CONFIG_MTD_DEVICE)
+       error = smi_mtd_init();
+       if (error < 0)
+               return 0;
+#endif
+
        return size;
 }
 
@@ -599,4 +616,150 @@ int flash_erase(flash_info_t *info, int s_first, int 
s_last)
        puts(" done\n");
        return rcode;
 }
-#endif
+
+#if defined(CONFIG_MTD_DEVICE)
+static int smi_mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+       flash_info_t *fi = mtd->priv;
+       size_t a_start = fi->start[0] + instr->addr;
+       size_t a_end = a_start + instr->len;
+       int s_first = -1;
+       int s_last = -1;
+       int error, sect;
+
+       for (sect = 0; sect < fi->sector_count; sect++) {
+               if (a_start == fi->start[sect])
+                       s_first = sect;
+
+               if (sect < fi->sector_count - 1) {
+                       if (a_end == fi->start[sect + 1]) {
+                               s_last = sect;
+                               break;
+                       }
+               } else {
+                       s_last = sect;
+                       break;
+               }
+       }
+
+       if (s_first >= 0 && s_first <= s_last) {
+               instr->state = MTD_ERASING;
+
+               error = flash_erase(fi, s_first, s_last);
+               if (error) {
+                       instr->state = MTD_ERASE_FAILED;
+                       return -EIO;
+               }
+
+               instr->state = MTD_ERASE_DONE;
+               mtd_erase_callback(instr);
+               return 0;
+       }
+
+       return -EINVAL;
+}
+
+static int smi_mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
+       size_t *retlen, u_char *buf)
+{
+       flash_info_t *fi = mtd->priv;
+       u_char *f = (u_char *)(fi->start[0]) + from;
+
+       memcpy(buf, f, len);
+       *retlen = len;
+
+       return 0;
+}
+
+static int smi_mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
+       size_t *retlen, const u_char *buf)
+{
+       flash_info_t *fi = mtd->priv;
+       u_long t = fi->start[0] + to;
+       int error;
+
+       error = write_buff(fi, (u_char *)buf, t, len);
+       if (!error) {
+               *retlen = len;
+               return 0;
+       }
+
+       return -EIO;
+}
+
+static void smi_mtd_sync(struct mtd_info *mtd)
+{
+       /*
+        * This function should wait until all pending operations
+        * finish. However this driver is fully synchronous, so
+        * this function returns immediately
+        */
+}
+
+static int smi_mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+       flash_info_t *fi = mtd->priv;
+
+       flash_protect(FLAG_PROTECT_SET, fi->start[0] + ofs,
+                                       fi->start[0] + ofs + len - 1, fi);
+       return 0;
+}
+
+static int smi_mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+       flash_info_t *fi = mtd->priv;
+
+       flash_protect(FLAG_PROTECT_CLEAR, fi->start[0] + ofs,
+                                       fi->start[0] + ofs + len - 1, fi);
+       return 0;
+}
+
+static int smi_mtd_init(void)
+{
+       struct flash_device *flash_device_p;
+       struct mtd_info *mtd;
+       flash_info_t *fi;
+       int i;
+
+       for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
+               fi = &flash_info[i];
+
+               if (!fi->size)
+                       continue;
+
+               flash_device_p = get_flash_device(fi->flash_id);
+               if (!flash_device_p)
+                       return -EIO;
+
+               mtd = &smi_mtd_info[i];
+
+               memset(mtd, 0, sizeof(struct mtd_info));
+
+               /* Uniform erase sizes for all sectors */
+               mtd->numeraseregions = 0;
+               mtd->erasesize = flash_device_p->sectorsize;
+
+               sprintf(smi_mtd_names[i], "nor%d", i);
+               mtd->name               = smi_mtd_names[i];
+               mtd->type               = MTD_NORFLASH;
+               mtd->flags              = MTD_CAP_NORFLASH;
+               mtd->size               = fi->size;
+               mtd->writesize          = 1;
+
+               mtd->erase              = smi_mtd_erase;
+               mtd->read               = smi_mtd_read;
+               mtd->write              = smi_mtd_write;
+               mtd->sync               = smi_mtd_sync;
+               mtd->lock               = smi_mtd_lock;
+               mtd->unlock             = smi_mtd_unlock;
+               mtd->priv               = fi;
+
+               if (add_mtd_device(mtd))
+                       return -ENOMEM;
+       }
+
+       return 0;
+}
+#endif /* CONFIG_MTD_DEVICE */
+
+#endif /* CONFIG_SYS_NO_FLASH */
-- 
1.8.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to