On Sat, Nov 17, 2012 at 09:10:15PM -0000, Ajoy Kumar Das wrote: > From: ajoy <akda...@yahoo.in> > > Added posted writes (read after writes) to effect the > change immediately for channel confiuration and channel > enable register > > Disable the channel to purge receieve data in TX_ONLY > mode transfer otherwise rx data will get affected by > the next immediate RX_ONLY mode transfer > > Wait for the EOT bit to be set after last byte has been > loaded to TX shift register in the the TX_ONLY mode.This > ensures TX data has been completely shifted out > > Disable the channel in RX_ONLY mode before reading the > last data from RXX register to prevent the SPI slave > to transmit next word > > Signed-off-by: Ajoy Kumar Das <akda...@yahoo.in> > Cc: Tom Rini <tr...@ti.com> > Cc: jacopo mondi <j.mo...@voltaelectronics.com>
Applied to u-boot-ti/master, thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
