Hi Sebastian, On Sun, 2 Dec 2012 15:36:12 +0100, Sebastian Hesselbarth <sebastian.hesselba...@gmail.com> wrote: > This patch set add support for the Marvell Dove 88AP510 SoC and > the SolidRun CuBox board based on that SoC. The patch set is divided > into the four following sections: > > (1) Patches 1-5: > Add support for the Dove SoC and related drivers. Where possible > drivers from Marvell Kirkwood are reused (mvsata, mvgbe), or > forked to allow more generic usage (SPI, GPIO). The SDHCI driver > is different and a new driver is added for it. The forked drivers > can also be reused on Kirkwood but that would have required patching > existing boards. > > (2) Patches 6-8: > Allow mvgbe to use the phylib API, add support for 88E1310 PHY and > allow Dove to use the driver. > > (3) Patch 9 > Add the SolidRun CuBox as the first board based on Marvell Dove SoC. > > (4) Patch 10 > Add support for different UART boot mode found on Dove. > > Sebastian Hesselbarth (10): > ARM: dove: add support for Marvell Dove SoC > GPIO: add gpio driver for Orion SoCs > MMC: sdhci: Add support for dove sdhci > SPI: Add Orion SPI driver > block: mvsata: add dove include > NET: phy: add 88E1310 PHY initialization > NET: mvgbe: add phylib support > NET: mvgbe: add support for Dove > Boards: Add support for SolidRun CuBox > tools: Add support for Dove to kwboot
Just a general remark: as this is a new support patch, it will only go in during next merge window; so when kirkwood or ARM pull requests are sent, make sure your patch set still applies to the new tree tip and if not, fix and submit a new version that does apply. (mentioning this because you're touching files that I'm pretty sure are being modified by changes that *will* go in 2013.01) Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot