Robert, On Wed, Dec 26, 2012 at 1:07 PM, Fabio Estevam <feste...@gmail.com> wrote: > On Wed, Dec 26, 2012 at 1:02 PM, Fabio Estevam <feste...@gmail.com> wrote: > >> With the new PMIC framework: is it safe to call the PMIC API from >> board_init function? > > Calling it from board_late_init fixes the issue for me. > > Will send the patch soon.
Can you try the patch below? board/freescale/mx53loco/mx53loco.c | 10 ++++++++-- include/configs/mx53loco.h | 1 + 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index 2c8cb7a..63a4f8b 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -462,12 +462,18 @@ int board_init(void) mxc_set_sata_internal_clock(); setup_iomux_i2c(); + + lcd_enable(); + + return 0; +} + +int board_late_init(void) +{ if (!power_init()) clock_1GHz(); print_cpuinfo(); - lcd_enable(); - return 0; } diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index e30502b..c4181bd 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -39,6 +39,7 @@ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT #define CONFIG_MXC_GPIO #define CONFIG_REVISION_TAG -- 1.7.9.5 It boots now, but I get resets now: U-Boot 2013.01-rc2-00172-gf8cfcf1-dirty (Dec 26 2012 - 13:13:28) Board: MX53 LOCO I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial CPU: Freescale i.MX53 family rev2.1 at 1000 MHz Reset cause: WDOG Net: FEC Warning: FEC using MAC address from net device Hit any key to stop autoboot: 0 data abort MAYBE you should read doc/README.arm-unaligned-accesses pc : [<aff72220>] lr : [<aff721fc>] sp : af565e20 ip : af566918 fp : 00000000 r10: 00000003 r9 : affabb5b r8 : af565f58 r7 : 00000000 r6 : 36747fff r5 : af5668e8 r4 : 36747fff r3 : af5668ec r2 : af5668eb r1 : 00000000 r0 : af5668e8 Flags: NzcV IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... U-Boot 2013.01-rc2-00172-gf8cfcf1-dirty (Dec 26 2012 - 13:13:28) Board: MX53 LOCO I2C: ready DRAM: 1 GiB but it looks like a separate issue? Regards, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot