Hi John Stile,
On 01/05/2013 09:25 AM, John Stile wrote:
u-boot-2012.10 build does compile with buildroot's .conf settings
BR2_TARGET_UBOOT_BOARDNAME="at91sam9g20ek_dataflash_cs1"
or
BR2_TARGET_UBOOT_BOARDNAME="at91sam9g20ek_nandflash"
But after writing my ubootEnvtFileDataFlash.bin to NOR with sam-ba
utility (which works with the u-boot-1.3.4), it is not found by the ROM
boot loader, so I'm not sure where to go for help.
I know ROM boot loader executes what ever it finds at NOR start
(0xD0000000) +0x00008400.
Does anyone else use a at91sam uboot-2012 and sam-ba, or have any other
suggestions?
Please check the text base of u-boot for at91sam9g20ek.
If you use the old bootstrap, it jump to 0x23f00000 after reading
u-boot, while the v2012.10 u-boot use 0x21f00000 as its text base.
If so, you can change u-boot or bootstrap to keep the two address the same.
Best Regards,
Bo Shen
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot