On 11/01/2013 08:13, Dirk Behme wrote: > From: Knut Wohlrab <knut.wohl...@de.bosch.com> > > The USB host interface is routed to plug USB1/J30 on the mother board. > > Signed-off-by: Knut Wohlrab <knut.wohl...@de.bosch.com> > ---
Hi Dirk, > board/freescale/mx6qsabreauto/mx6qsabreauto.c | 7 +++++++ > include/configs/mx6qsabreauto.h | 11 +++++++++++ > 2 files changed, 18 insertions(+), 0 deletions(-) > > diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c > b/board/freescale/mx6qsabreauto/mx6qsabreauto.c > index 9e3700e..696ddb4 100644 > --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c > +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c > @@ -101,6 +101,13 @@ static void setup_iomux_uart(void) > imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads)); > } > > +#ifdef CONFIG_USB_EHCI_MX6 > +int board_ehci_hcd_init(int port) > +{ > + return 0; > +} > +#endif board_ehci_hcd_init is declared weak drivers/usb/host/ehci-mx6.c. You do nothing in this function, why do you need ? You can completely drop it. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot