Am 2012-11-23 23:23, schrieb Angelo Dureghello: > Fix coldfire serial driver bindings no more relocated to ram after last > changes to drivers/serial/serial.c (regression). > Serial initialization in ram has to be called after that gd->reloc_off is > calculated. > > Signed-off-by: Angelo Dureghello <sysa...@gmail.com> > Cc: Jason Jin <jason....@freescale.com> > --- > diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c > index 02d73fd..373570c 100644 > --- a/arch/m68k/lib/board.c > +++ b/arch/m68k/lib/board.c > @@ -402,14 +402,14 @@ void board_init_r (gd_t *id, ulong dest_addr) > > gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ > > - serial_initialize(); > - > debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr); > > WATCHDOG_RESET (); > > gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE; > > + serial_initialize(); > + > monitor_flash_len = (ulong)&__init_end - dest_addr; > > #if defined(CONFIG_NEEDS_MANUAL_RELOC) >
Acked-by: Jens Scharsig (BuS Elektronik) <e...@bus-elektronik.de> Tested-by: Jens Scharsig (BuS Elektronik) <e...@bus-elektronik.de> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot