On Sun, Jan 20, 2013 at 1:53 AM, Marek Vasut <ma...@denx.de> wrote: > Dear Linus Walleij, > >> This, enabled the FDT library for the Integrators, updates >> the Integrator/CP default command to load and pass a Device >> Tree when booting the kernel from the on-board ethernet, >> define same environment for the Integrator/AP and move the >> load address around to something even. >> >> Signed-off-by: Linus Walleij <linus.wall...@linaro.org> > > Shouldn't the load address be 0x8000 instead of 0x800 (it used to be 0x7fc0) ?
0x800 works fine, but honestly I don't know why Peter P ages ago chose the very odd address 0x7fc0. But you know U-boot way better than me, and most things work fine it seems. What is a typical load address? > Also, "setenv loadaddr nnnn" is nonsense, just use the usual > CONFIG_SYS_LOAD_ADDR (which inherently sets the loadaddr env variable). Or do > you see a problem there? Not really, it was mainly because there is no way to set the FDT load address as a variable, e.g. we don't have CONFIG_FDT_LOAD_ADDR, and I wanted to keep both definitions in the same place, i.e. in the default boot script. On the Integrator/AP I have to load the two pieces one at the time, manually using loady, so it is a bit helpful to have the address prints at least. Yours, Linus Walleij _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
