Configuring custom memory init value using CONFIG_MEM_INIT_VALUE in
the board config file doesn't work and memory is always initialized
to the value 0xdeadbeef. Only use this default value if a board doesn't
define CONFIG_MEM_INIT_VALUE.
Signed-off-by: Anatolij Gustschin <ag...@denx.de>
Cc: Andy Fleming <aflem...@freescale.com>
---
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index 8016bcd..26c42f7 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -1190,7 +1190,11 @@ static void set_ddr_data_init(fsl_ddr_cfg_regs_t *ddr)
{
unsigned int init_value; /* Initialization value */
+#ifdef CONFIG_MEM_INIT_VALUE
+ init_value = CONFIG_MEM_INIT_VALUE;
+#else
init_value = 0xDEADBEEF;
+#endif
ddr->ddr_data_init = init_value;
}
--
1.7.11.7
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
