Dear Sebastian, In message <E70AF999396FDF4EAE40E195B847096109F5D6FD@SRVEXCH-2K10.CADCON.INTERN> you wrote: > > We use a custom board configuration for our custom hardware. > I can send parts of it, if needed.
Thanks, but no. Parts are of no use to us. Basicly you have to options: have your code merged into mainline (to do that you have to submit a complete set of patches here on the mailing list), or maintain your out-of-tree port yourself (in which case David Woodhouse's statement applies, see http://article.gmane.org/gmane.linux.kernel.embedded/3534). > We are currently using v2012.10. This works fine for the mainline code. > The toolchain is OSELAS.2012.12.0 > (http://www.pengutronix.de/oselas/toolchain). So eother it's an issue with your port, or with your toolchain. > With toolchain OSELAS.2011.11.2 everything worked fine. > We didn't change anything else. Then this smells like a tool chain issue. You might contact Pengutronix support for help with their tool chain. > So I suppose this might be a mainline problem. > It seems like the mentioned variables don't get set correctly as before. Well, no such problems are observed with mainline code and - for example - ELDK 5.5 and 5.4-M3-rc1. What makes you think it's a mainline issue? Can you prove such problems with mainline code, and with a known to be working tool chain? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] 1 1 was a race-horse, 2 2 was 1 2. When 1 1 1 1 race, 2 2 1 1 2. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
