Update DT tables and enable I2C driver support for the Tegra114 Dalmore board. This uses the standard Tegra I2C driver. 5 controllers are supported, although all may not have devices behind them on every board.
Changes in V2: - use new calculation for T114 I2C clocks - incorporate review comments from StephenW for the dtsi file Changes in V3: - Added tegra114-i2c name to compat_names/compat_id table(s) - Add search for T114 I2C node in i2c_init_board - Added is_scs flag to i2c_bus struct (single clock source HW) - Use is_scs flag to trigger new clock source rate calculation - Moved aliases to dtsi file as per StephenW - Removed tegra30-car & tegra20-i2c compatible strings - Changed I2C5 (PWR_I2C) clock to 400MHz Tom Warren (3): Tegra: I2C: Add T114 clock support to tegra_i2c driver Tegra114: fdt: Update DT files with I2C info for T114/Dalmore Tegra114: I2C: Enable I2C driver on Dalmore E1611 eval board arch/arm/dts/tegra114.dtsi | 64 +++++++++++++++++++++++++++ arch/arm/include/asm/arch-tegra/tegra_i2c.h | 6 +++ board/nvidia/dts/tegra114-dalmore.dts | 28 ++++++++++++ drivers/i2c/tegra_i2c.c | 42 +++++++++++++++-- include/configs/dalmore.h | 9 ++++ include/configs/tegra114-common.h | 3 + include/fdtdec.h | 1 + lib/fdtdec.c | 1 + 8 files changed, 149 insertions(+), 5 deletions(-) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot