On 02/08/2013 11:10 AM, Simon Glass wrote: > Hi Stephen > > On Fri, Feb 8, 2013 at 9:23 AM, Stephen Warren <swar...@wwwdotorg.org> wrote: >> On 02/08/2013 08:12 AM, Simon Glass wrote: >>> Enable CONFIG_SYS_GENERIC_BOARD for Tegra 2 Seaboard. >> >> Shouldn't this be enabled for Tegra generically, rather than for just >> one Tegra board? I haven't looked at the rest of the series yet, but it >> sure seems better if all Tegra boards always work the same way. > > Yes but I can only test on that board. I suspect it should be OK with > others but I've taken a fairly conservative approach as I don't want > to break things. > > If you have a board about, please try putting it in tegra-common.h or > similar and see what happens.
This is something Tom should drive. > BTW it would be nice to have a tegra20-dt.h config. Then I would just > test that one board and know that other changes can only be > FDT-related. But I think due to pinmux that isn't possible right now, > as previously discussed. Well, there are quite a few peripherals which are only initialized/instantiated from board files too, so a generic DT config wouldn't be very useful yet, although Tom and Allen are in the process of converting things as they add Tegra114 support. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot