Hi Tom,

Am Montag, den 11.02.2013, 10:17 -0700 schrieb Tom Warren:
> Linux dts files were used for those boards that didn't already
> have sdhci info populated. Tamonten has their own dtsi file with
> common sdhci nodes (sourced from Linux).
> 
> Signed-off-by: Tom Warren <twar...@nvidia.com>
> ---
> v2:
> - cleanup comments in dts files/match w/kernel files
> - add sdhci aliases in all dts files
> - use tegra20-tamonten.dtsi from the kernel for AD boards
> 
>  arch/arm/dts/tegra20-tamonten.dtsi               |  489 
> ++++++++++++++++++++++

I'm not sure if pushing the whole file in this patch is the right thing
to do.

>  arch/arm/dts/tegra20.dtsi                        |   16 +-
>  board/avionic-design/dts/tegra20-medcom-wide.dts |    1 +
>  board/avionic-design/dts/tegra20-plutux.dts      |    1 +
>  board/avionic-design/dts/tegra20-tec.dts         |    1 +
>  board/compal/dts/tegra20-paz00.dts               |   19 +-
>  board/compulab/dts/tegra20-trimslice.dts         |   14 +
>  board/nvidia/dts/tegra20-harmony.dts             |   18 +
>  board/nvidia/dts/tegra20-seaboard.dts            |   12 +-
>  board/nvidia/dts/tegra20-ventana.dts             |   15 +
>  board/nvidia/dts/tegra20-whistler.dts            |   13 +
>  board/toradex/dts/tegra20-colibri_t20_iris.dts   |    6 +
>  12 files changed, 595 insertions(+), 10 deletions(-)
>  create mode 100644 arch/arm/dts/tegra20-tamonten.dtsi
> 
[...]
> diff --git a/board/toradex/dts/tegra20-colibri_t20_iris.dts 
> b/board/toradex/dts/tegra20-colibri_t20_iris.dts
> index c29b43a..0dd4c43 100644
> --- a/board/toradex/dts/tegra20-colibri_t20_iris.dts
> +++ b/board/toradex/dts/tegra20-colibri_t20_iris.dts
> @@ -10,6 +10,7 @@
>               usb0 = "/usb@c5008000";
>               usb1 = "/usb@c5000000";
>               usb2 = "/usb@c5004000";
> +             sdhci0 = "/sdhci@c8000600";
>       };
>  
>       usb@c5000000 {
> @@ -35,4 +36,9 @@
>                       compatible = "nand-flash";
>               };
>       };
> +
> +     sdhci@c8000600 {
> +             status = "okay";
> +             bus-width = <4>;
You are missing the CD GPIO here. It's PC7.

> +     };
>  };

Regards,
Lucas


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to