Dear Stefan Roese, On 02/12/2013 01:09 PM, Stefan Roese wrote: > On 12.02.2013 12:48, Andreas Bießmann wrote:
<snip> > 3. Use "fdt" commands to patch the DT blob: > => fdt addr 1800000 > => fdt boardsetup > => fdt chosen > > 4. Display patched DT blob (optional): > => fdt print > > 5. Save fdt to NOR flash: > => erase fc060000 fc07ffff > => cp.b 1800000 fc060000 10000 > ... > > So all we need for DT based booting (compared to ATAG booting) is the > "fdt" command. As I understand this guide there is no 'spl export' required for 'Falcon Mode' with FDT, is that correct? > Stefano, perhaps you could integrate this into this README as well. +1 Best regards Andreas Bießmann _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot