Hi Sir,
I am Sadashiva Reddy working in Mistral Solutions Pvt Ltd. I am using AMCC PPC440Gx processor for our project presently the board is working with vxWorks. But our customer new requirement is same board should be ported with linux but porting time is very less. So, I am asking the help from you. Where do I get proper U-boot and kernel source code for the below mentioned specification or nearly related board specfication from your website. Can I get any link where I can get the working u-boot and kernel code for the below specification or near to the specfication. Board sprecification details are. 1. Proccessor = PPC440gx 2. NOR flash = Size 128MB 3. SDRAM = 256 MB 4. PHY = RGMII 5. UART = RS 232 6. FRAM or EEPROM = 2KB 7. VC0 = 1333 MHz 8. SysClock = 33.33 MHz Feedback is CPU core clock. 9. Memclock = 133.33 MHz 10. OPBClcok = 66.66 MHz 11. PerClock = 66.66 MHz Best Regards, Sadashiv
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
