On 02/13/2013 02:44 PM, Tom Warren wrote: > tegra_mmc_init() now parses the DT info for bus width, WP/CD GPIOs, etc. > Tested on Seaboard, fully functional. > > Tamonten boards (medcom-wide, plutux, and tec) use a different/new > dtsi file w/common settings.
> diff --git a/board/compulab/trimslice/trimslice.c > b/board/compulab/trimslice/trimslice.c > +#ifdef CONFIG_TEGRA_MMC It seems a little odd to add this ifdef when it's know that config option is enabled in the trimslice config file. I can somewhat understand leaving the ifdef in any other board files that already had it, but actively adding it here seems strange. > diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c > @@ -184,7 +187,6 @@ int board_init(void) > /* prepare the WB code to LP0 location */ > warmboot_prepare_code(TEGRA_LP0_ADDR, TEGRA_LP0_SIZE); > #endif > - > return 0; > } Unrelated change? > diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c > +static int process_nodes(const void *blob, int node_list[], int count) > + /* Mark position as used */ > + node_list[i] = -1; Is this actually necessary? I'll try and test these patches on all the Tegra20 boards I have tomorrow. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot