On Fri, Feb 15, 2013 at 04:37:33PM +0000, Tom Rini wrote: > On Wed, Feb 13, 2013 at 09:43:57AM -0500, Matt Porter wrote: > > > Split clock.c for am335x and ti814x and add the ti814x include file. > > > > Signed-off-by: Matt Porter <mpor...@ti.com> > > [snip] > > +++ b/arch/arm/cpu/armv7/am33xx/clock-am335x.c > [snip] > > +#define PRCM_MOD_EN 0x2 > > +#define PRCM_FORCE_WAKEUP 0x2 > > +#define PRCM_FUNCTL 0x0 > > + > > +#define PRCM_EMIF_CLK_ACTIVITY BIT(2) > > +#define PRCM_L3_GCLK_ACTIVITY BIT(4) > > + > > +#define PLL_BYPASS_MODE 0x4 > > +#define ST_MN_BYPASS 0x00000100 > > +#define ST_DPLL_CLK 0x00000001 > > +#define CLK_SEL_MASK 0x7ffff > > +#define CLK_DIV_MASK 0x1f > > +#define CLK_DIV2_MASK 0x7f > > +#define CLK_SEL_SHIFT 0x8 > > +#define CLK_MODE_SEL 0x7 > > +#define CLK_MODE_MASK 0xfffffff8 > > +#define CLK_DIV_SEL 0xFFFFFFE0 > > +#define CPGMAC0_IDLE 0x30000 > > +#define DPLL_CLKDCOLDO_GATE_CTRL 0x300 > [snip] > > +++ b/arch/arm/cpu/armv7/am33xx/clock-ti814x.c > [snip] > > + /* Selects OSC0 (20MHz) for DMTIMER1 */ > > + temp = readl(DMTIMER_CLKSRC); > > + temp &= ~(0x7 << 3); > > + temp |= (0x4 << 3); > > + writel(temp, DMTIMER_CLKSRC); > > + > > + writel(0x2, DM_TIMER1_BASE + 0x54); > > Magic values are defined for clock-am335x.c but not in clock-ti814x.c, > please fix clock-ti814x.c to define out the magic values ala am335x.c. > Thanks!
Ok, will clean this up. -Matt _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot