Hi Fabio, On Friday, February 22, 2013 10:06:42 PM, Fabio Estevam wrote: > Hi Benoît, > > On Fri, Feb 22, 2013 at 5:09 PM, Benoît Thébaudeau > <benoit.thebaud...@advansee.com> wrote: > > > It looks very much like the issue that Marek had on i.MX53 (which > > self-resolved > > for an unknown reason). > > > > Try to enable the debug trace to see if anything else is printed after > > display_dram_config(). I would especially be interested in: > > debug("relocation Offset is: %08lx\n", gd->reloc_off); > > debug("monitor flash len: %08lX\n", monitor_flash_len); > > Here is the output: > > U-Boot 2013.01 (Feb 22 2013 - 18:00:50) > > U-Boot code: 87F00000 -> 87F2C184 BSS: -> 87F311B4 > CPU: Freescale i.MX31 rev 2.0 at 532 MHz. > Reset cause: POR > Board: MX31PDK > monitor len: 000311B4 > ramsize: 08000000 > TLB table from 87ff0000 to 87ff4000 > Top of RAM usable for U-Boot at: 87ff0000 > Reserving 196k for U-Boot at: 87fbe000 > Reserving 640k for malloc() at: 87f1e000 > Reserving 32 Bytes for Board Info at: 87f1dfe0 > Reserving 128 Bytes for Global Data at: 87f1df60 > New Stack Pointer is: 87f1df50 > RAM Configuration: > Bank #0: 80000000 128 MiB > relocation Offset is: 000be000
CONFIG_SYS_TEXT_BASE seems fine according to this trace. But anyway, can you test with this change in mx31pdk.h? #define CONFIG_SPL_TEXT_BASE 0x84000000 #define CONFIG_SYS_TEXT_BASE 0x83000000 Can you try to revert 10/19, only for arm1136/start.S (1 line to restore)? There is an issue in this patch that I have already fixed in my v8. Best regards, Benoît _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot