From: Jesse Gilles <jgil...@multitech.com>
Fix pin setting in MII mode
Signed-off-by: Jesse Gilles <jgil...@multitech.com>
---
arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
index d0d31da..3c58536 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
@@ -206,14 +206,14 @@ void at91_macb_hw_init(void)
#ifndef CONFIG_RMII
/* Only emac0 support MII */
if (has_emac0()) {
- at91_set_b_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */
- at91_set_b_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */
- at91_set_b_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */
- at91_set_b_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */
- at91_set_b_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */
- at91_set_b_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */
- at91_set_b_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */
- at91_set_b_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */
+ at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */
+ at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */
+ at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */
+ at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */
+ at91_set_a_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */
+ at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */
+ at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */
+ at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */
}
#endif
}
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
