From: Dirk Behme <dirk.be...@de.bosch.com> Several ARM timer implementations use gd->arch.tbl to record the absolute tick count of 32-bit counters, including timer overflows. For example arch/arm/imx-common/timer.c does:
ulong lastinc; ulong now = counter value; if (no overflow) { ... } else { /* counter overflow */ gd->arch.tbl += (0xFFFFFFFF - lastinc) + now; } lastinc = now; As we use a 32-bit counter and the two ulong (32-bit) variables 'lastinc' and 'now' here, gd->arch.tbl should be long long (64-bit) to not overflow at the same time, too. Signed-off-by: Knut Wohlrab <knut.wohl...@de.bosch.com> Signed-off-by: Dirk Behme <dirk.be...@de.bosch.com> --- arch/arm/include/asm/global_data.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 37ac0da..1099af9 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -41,7 +41,7 @@ struct arch_global_data { /* "static data" needed by most of timer.c on ARM platforms */ unsigned long timer_rate_hz; unsigned long tbu; - unsigned long tbl; + unsigned long long tbl; unsigned long lastinc; unsigned long long timer_reset_value; #ifdef CONFIG_IXP425 -- 1.7.10.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot