Tested on my Dalmore E1611 board, eMMC and SD-Card work fine, can load a kernel off of an SD card OK, card detect works, and the env is now stored in eMMC (end of the 2nd 'boot' sector, same as Tegra20/30).
Signed-off-by: Tom Warren <twar...@nvidia.com> Reviewed-by: Stephen Warren <swar...@nvidia.com> --- v2: Change CONFIG_ENV_OFFSET to match the size of Dalmore's eMMC chip include/configs/dalmore.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index c7deea5..3f4b70e 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -50,7 +50,17 @@ #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_CMD_I2C -#define CONFIG_ENV_IS_NOWHERE +/* SD/MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_TEGRA_MMC +#define CONFIG_CMD_MMC + +/* Environment in eMMC, at the end of 2nd "boot sector" */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 +#define CONFIG_ENV_OFFSET (((4096 - 512) * 1024) - CONFIG_ENV_SIZE) #define MACH_TYPE_DALMORE 4304 /* not yet in mach-types.h */ -- 1.8.1.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
