Hi Amar,
On 04/03/2013 11:08 PM, Amar wrote:
> This patch adds commands to access(open/close) and resize boot partitions on
> EMMC.
>
> Signed-off-by: Amar <amarendra...@samsung.com>
> ---
> Changes since V1:
> 1)Combined the common piece of code between 'open' and 'close'
> operations.
>
> Changes since V2:
> 1)Updation of commit message and resubmition of proper patch set.
>
> Changes since V3:
> No change.
>
> Changes since V4:
> 1)Added a new funtion boot_part_access() to combine the common parts of
> 'mmc open' and 'mmc close' functionalities.
> 2)Used the generic function "mmc_boot_part_access()" instead of
> two functions "mmc_boot_open()" and "mmc_boot_close()". By doing so user
> can specify which boot partition to be accessed (opened / closed).
>
> Changes since V5:
> 1)Updated minor nits in response to review comments.
>
> Changes since V6:
> No change.
>
> Changes since V7:
> 1)The piece of code involved in open/close and resize of EMMC boot
> partition has been made conditional and is enabled only if the macro
> CONFIG_SUPPORT_EMMC_BOOT is defined.
>
> common/cmd_mmc.c | 110
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 108 insertions(+), 2 deletions(-)
>
> diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
> index 8c53a10..c5f60a2 100644
> --- a/common/cmd_mmc.c
> +++ b/common/cmd_mmc.c
> @@ -147,6 +147,36 @@ U_BOOT_CMD(
> "- display info of the current MMC device"
> );
>
> +#ifdef CONFIG_SUPPORT_EMMC_BOOT
> +static int boot_part_access(struct mmc *mmc, u32 ack, u32 part_num, u32
> access)
Why do you use u32? I know that just used 8bit.
> +{
> + int err;
> + err = mmc_boot_part_access(mmc, ack, part_num, access);
> +
> + if ((err == 0) && (access != 0)) {
> + printf("\t\t\t!!!Notice!!!\n");
> +
> + printf("!You must close EMMC boot Partition");
> + printf("after all images are written\n");
> +
> + printf("!EMMC boot partition has continuity");
> + printf("at image writing time.\n");
> +
> + printf("!So, do not close the boot partition");
> + printf("before all images are written.\n");
> + return 0;
> + } else if ((err == 0) && (access == 0))
> + return 0;
> + else if ((err != 0) && (access != 0)) {
> + printf("EMMC boot partition-%d OPEN Failed.\n", part_num);
> + return 1;
> + } else {
> + printf("EMMC boot partition-%d CLOSE Failed.\n", part_num);
> + return 1;
> + }
> +}
> +#endif
> +
> static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const
> argv[])
> {
> enum mmc_state state;
> @@ -248,8 +278,75 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int
> argc, char * const argv[])
> curr_device, mmc->part_num);
>
> return 0;
> - }
> +#ifdef CONFIG_SUPPORT_EMMC_BOOT
> + } else if ((strcmp(argv[1], "open") == 0) ||
> + (strcmp(argv[1], "close") == 0)) {
> + int dev;
> + struct mmc *mmc;
> + u32 ack, part_num, access = 0;
> +
> + if (argc == 4) {
> + dev = simple_strtoul(argv[2], NULL, 10);
> + part_num = simple_strtoul(argv[3], NULL, 10);
> + } else {
> + return CMD_RET_USAGE;
> + }
>
> + mmc = find_mmc_device(dev);
> + if (!mmc) {
> + printf("no mmc device at slot %x\n", dev);
> + return 1;
> + }
> +
> + if (IS_SD(mmc)) {
> + printf("SD device cannot be opened/closed\n");
> + return 1;
> + }
> +
> + if ((part_num <= 0) || (part_num > MMC_NUM_BOOT_PARTITION)) {
> + printf("Invalid boot partition number:\n");
> + printf("Boot partition number cannot be <= 0\n");
> + printf("EMMC44 supports only 2 boot partitions\n");
What means? EMMC44 supports only 2 boot partitions?
> + return 1;
> + }
> +
> + if (strcmp(argv[1], "open") == 0)
> + access = part_num; /* enable R/W access to boot part*/
> + if (strcmp(argv[1], "close") == 0)
else if?
> + access = 0; /* No access to boot partition */
> +
> + /* acknowledge to be sent during boot operation */
> + ack = 1;
ack is always set to 1? then Can't initialize ack value as 1.
Otherwise, boot_part_access(mmc, 1, part_num, access)?
Best Regards,
Jaehoon Chung
> + return boot_part_access(mmc, ack, part_num, access);
> +
> + } else if (strcmp(argv[1], "bootpart") == 0) {
> + int dev;
> + dev = simple_strtoul(argv[2], NULL, 10);
> +
> + u32 bootsize = simple_strtoul(argv[3], NULL, 10);
> + u32 rpmbsize = simple_strtoul(argv[4], NULL, 10);
> + struct mmc *mmc = find_mmc_device(dev);
> + if (!mmc) {
> + printf("no mmc device at slot %x\n", dev);
> + return 1;
> + }
> +
> + if (IS_SD(mmc)) {
> + printf("It is not a EMMC device\n");
> + return 1;
> + }
> +
> + if (0 == mmc_boot_partition_size_change(mmc,
> + bootsize, rpmbsize)) {
> + printf("EMMC boot partition Size %d MB\n", bootsize);
> + printf("EMMC RPMB partition Size %d MB\n", rpmbsize);
> + return 0;
> + } else {
> + printf("EMMC boot partition Size change Failed.\n");
> + return 1;
> + }
> +#endif /* CONFIG_SUPPORT_EMMC_BOOT */
> + }
> state = MMC_INVALID;
> if (argc == 5 && strcmp(argv[1], "read") == 0)
> state = MMC_READ;
> @@ -324,5 +421,14 @@ U_BOOT_CMD(
> "mmc rescan\n"
> "mmc part - lists available partition on current mmc device\n"
> "mmc dev [dev] [part] - show or set current mmc device [partition]\n"
> - "mmc list - lists available devices");
> + "mmc list - lists available devices\n"
> +#ifdef CONFIG_SUPPORT_EMMC_BOOT
> + "mmc open <dev> <boot_partition>\n"
> + " - Enable boot_part for booting and enable R/W access of boot_part\n"
> + "mmc close <dev> <boot_partition>\n"
> + " - Enable boot_part for booting and disable access to boot_part\n"
> + "mmc bootpart <device num> <boot part size MB> <RPMB part size MB>\n"
> + " - change sizes of boot and RPMB partions of specified device\n"
> #endif
> + );
> +#endif /* !CONFIG_GENERIC_MMC */
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
