The syndrome functions should use the page number passed as argument instead of
the page number saved upon NAND_CMD_READ0.

This does not make any difference if the NAND_NO_AUTOINCR option is set, but
otherwise this fixes accesses to the wrong pages.

Signed-off-by: Benoît Thébaudeau <benoit.thebaud...@advansee.com>
Acked-by: Scott Wood <scottw...@freescale.com>
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
 - New patch.

Changes in v3: None
Changes in v2: None

 drivers/mtd/nand/mxc_nand.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 62d6965..29ceab3 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -463,7 +463,7 @@ static int mxc_nand_read_page_raw_syndrome(struct mtd_info 
*mtd,
        int n;
 
        _mxc_nand_enable_hwecc(mtd, 0);
-       chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, host->page_addr);
+       chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
 
        for (n = 0, steps = chip->ecc.steps; steps > 0; n++, steps--) {
                host->col_addr = n * eccsize;
@@ -507,7 +507,7 @@ static int mxc_nand_read_page_syndrome(struct mtd_info *mtd,
        uint8_t *oob = chip->oob_poi;
 
        MTDDEBUG(MTD_DEBUG_LEVEL1, "Reading page %u to buf %p oob %p\n",
-             host->page_addr, buf, oob);
+             page, buf, oob);
 
        /* first read the data area and the available portion of OOB */
        for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
@@ -545,7 +545,7 @@ static int mxc_nand_read_page_syndrome(struct mtd_info *mtd,
 
        /* Then switch ECC off and read the OOB area to get the ECC code */
        _mxc_nand_enable_hwecc(mtd, 0);
-       chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, host->page_addr);
+       chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, page);
        eccsteps = chip->ecc.steps;
        oob = chip->oob_poi + chip->ecc.prepad;
        for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
-- 
1.7.10.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to