On Tuesday, April 9, 2013 10:57:04 PM, Benoît Thébaudeau wrote: > Hi Albert, > > On Tuesday, April 9, 2013 10:17:04 PM, Albert ARIBAUD wrote: > > Hi Benoît, > > > > On Tue, 9 Apr 2013 21:48:47 +0200, Benoît Thébaudeau > > <benoit.thebaud...@advansee.com> wrote: > > > > > This also fixes support for mx31pdk and tx25, which had been broken by > > > commit > > > e05e5de7fae5bec79617e113916dac6631251156. > > > > > > Signed-off-by: Benoît Thébaudeau <benoit.thebaud...@advansee.com> > > > Acked-by: Scott Wood <scottw...@freescale.com> > > > Tested-by: Fabio Estevam <fabio.este...@freescale.com> > > > --- > > > Changes in v11: > > > - mx31pdk: Rename u-boot-nand.bin to u-boot-with-spl.bin (new target > > > binary > > > name) in prg_uboot command. > > > - mx31pdk: Enlarge CONFIG_SYS_NAND_U_BOOT_SIZE from 0x32000 to 0x3f800 > > > (which > > > corresponds to the size allocated for this purpose in NAND Flash) in > > > order to > > > leave enough room whatever the toolchain used. > > > - mx31pdk: Set back CONFIG_SPL_TEXT_BASE and CONFIG_SYS_TEXT_BASE by > > > 0x00100000 > > > because the original U-Boot at CONFIG_SYS_TEXT_BASE was overlapping > > > the > > > global data being written prior to relocation by > > > arch/arm/lib/board.c:board_init_f(). > > > > I gather this patch is exactly what finally worked for Fabio's mx31? > > Correct, apart from the file renaming in prg_uboot, which has no influence > here.
And with: http://patchwork.ozlabs.org/patch/235173/ Best regards, Benoît _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot