On 04/09/2013 12:04:18 AM, Prabhakar Kushwaha wrote:
On 04/09/2013 06:25 AM, Scott Wood wrote:
On 04/05/2013 09:38:32 PM, Prabhakar Kushwaha wrote:
On 04/06/2013 02:10 AM, Scott Wood wrote:
On 03/22/2013 02:08:05 AM, Prabhakar Kushwaha wrote:
diff --git a/board/freescale/common/Makefile
b/board/freescale/common/Makefile
index 75725b4..a4d521c 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -29,6 +29,15 @@ endif
LIB = $(obj)libfreescale.o
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+ifndef MINIMAL
COBJS-$(CONFIG_FSL_CADMUS) += cadmus.o
COBJS-$(CONFIG_FSL_VIA) += cds_via.o
COBJS-$(CONFIG_FMAN_ENET) += fman.o
@@ -62,6 +71,7 @@ SUBLIB-$(CONFIG_P3041DS) +=
p_corenet/libp_corenet.o
SUBLIB-$(CONFIG_P4080DS) += p_corenet/libp_corenet.o
SUBLIB-$(CONFIG_P5020DS) += p_corenet/libp_corenet.o
SUBLIB-$(CONFIG_P5040DS) += p_corenet/libp_corenet.o
+endif
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
If this is needed to avoid pulling in any files from this
directory, why did p1_p2_rdb_pc not need this? Is there a
particular file that is failing to build or failing to get
optimized away
I cannot avoid this directory :(.
because new SPL compile this directory even after undef QIXIS
defines
#ifndef CONFIG_SPL_BUILD
#define CONFIG_FSL_QIXIS
#endif
Yeah, the makefiles never see CONFIG_SPL_BUILD -- it only works for
C code.
The P1022 SPL patch just does this in the makefile:
+ifndef CONFIG_SPL_BUILD
COBJS-$(CONFIG_FSL_NGPIXIS) += ngpixis.o
+endif
...which is less intrusive. We can revisit it if we end up actually
needing pixis/qixis inside an SP
Only putting qixis.c in ifndef CONFIG_SPI_BUILD may not work for
9132QDS. following change is also required i.e. to put
CONFIG_ID_EEPROM in ifndef CONFIG_SPI_BUILD
+ifndef CONFIG_SPL_BUILD
COBJS-$(CONFIG_FSL_QIXIS) += qixis.o
-COBJS-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o
COBJS-$(CONFIG_ID_EEPROM) += sys_eeprom.o
+endif
+COBJS-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o
It will be good to have original patch which do not compile any file
for SPL. if any file needs to be compiled for SPL, it can be added in
ifdef MINIMAL.
OK.
-Scott
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
