On Wed, Mar 20, 2013 at 11:38:10AM -0400, Matt Porter wrote: > This series adds support for CPSW on the PG1.0 TI814x EVM board. > The V1 CPSW on TI814x requires minor register changes to the > existing driver as well as TI814x-specific pll/clock support. > An ET1011C phy driver is added to support the PHY present on the > PG1.0 EVM. > > It has been tested loading/booting a Linux kernel and regression > tested on BeagleBone and EVM-SK AM33XX boards. It has also been > MAKEALL tested for all am33xx platforms. > > The series applies on top of the following patches: > - am33xx: Add required includes to some omap/am33xx code > http://patchwork.ozlabs.org/patch/227804/ > - Add TI814x EVM Support v4 > http://www.mail-archive.com/u-boot@lists.denx.de/msg108356.html > > Changes since v1: > - Improved sata pll config comment and defined magic clock values > - Added the kernel tag that the et1011c.c driver is derived from > > Matt Porter (4): > am33xx: add pll and clock support for TI814x CPSW > cpsw: add support for TI814x slave_regs differences > phy: add support for ET1011C phys > ti814x_evm: enable CPSW support > > arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 103 +++++++++++++++++- > arch/arm/include/asm/arch-am33xx/hardware_ti814x.h | 1 + > board/ti/ti814x/evm.c | 75 +++++++++++++ > board/ti/ti814x/evm.h | 1 + > board/ti/ti814x/mux.c | 35 +++++++ > drivers/net/cpsw.c | 6 ++ > drivers/net/phy/Makefile | 1 + > drivers/net/phy/et1011c.c | 110 > ++++++++++++++++++++ > drivers/net/phy/phy.c | 3 + > include/configs/ti814x_evm.h | 21 ++++ > include/phy.h | 1 + > 11 files changed, 355 insertions(+), 2 deletions(-) > create mode 100644 drivers/net/phy/et1011c.c
Applied to u-boot-ti/next, thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot