Hi Eric, On Wed, Apr 17, 2013 at 3:57 PM, Eric Nelson <eric.nel...@boundarydevices.com> wrote:
> More importantly than eliminating code in the mainline kernel, > enabling the clock will remove squeal after an ungraceful > reboot (watchdog) if hooked up to speakers. I believe you > can see this under Android by issuing a 'reboot' command. Ok, great. I was not aware of this problem. Glad to know that it also fixes it. I can send this same change to nitrogen and wandboard. > Does wandboard also use SGTL5000 connected up to CKO1? Yes, it does. I started to adding audio support to wandboard in the mainline kernel, then I saw all the code that mx6qsabrelite uses to configure the cko1, and I preferred not to repeat it again. It is much simpler to let the bootloader take care of it, as it is a simple register write. Regards, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot