This target is currently concatenating u-boot SPL in imximage format
with u-boot.bin. The NAND SPL can load a raw binary, but the preffered
format with much less limitations is uImage format. Fix the target
so u-boot.bin is first converted into uImage format and only after
that is concatenated.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Albert ARIBAUD <albert.u.b...@aribaud.net>
Cc: Benoît Thébaudeau <benoit.thebaud...@advansee.com>
Cc: Fabio Estevam <fabio.este...@freescale.com>
Cc: Scott Wood <scottw...@freescale.com>
Cc: Stefano Babic <sba...@denx.de>
Cc: Tom Rini <tr...@ti.com>
---
arch/arm/imx-common/Makefile | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index 44b6822..ba31d3e 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -69,8 +69,11 @@ $(OBJTREE)/u-boot-with-nand-spl.imx: $(OBJTREE)/SPL
$(OBJTREE)/u-boot.bin
-I binary -O binary $(OBJTREE)/spl/u-boot-nand-spl.imx \
$(OBJTREE)/spl/u-boot-nand-spl-pad.imx
rm $(OBJTREE)/spl/u-boot-nand-spl.imx
- cat $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.bin > $@
- rm $(OBJTREE)/spl/u-boot-nand-spl-pad.imx
+ $(OBJTREE)/tools/mkimage -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
+ -e $(CONFIG_SYS_TEXT_BASE) -C none -d $(OBJTREE)/u-boot.bin \
+ $(OBJTREE)/u-boot.uim
+ cat $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.uim > $@
+ rm $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.uim
#########################################################################
--
1.7.11.7
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
