From: Amar <amarendra...@samsung.com> This patch adds commands to access(open/close) and resize boot partitions on EMMC.
Signed-off-by: Amar <amarendra...@samsung.com> --- Changes since V1: 1)Combined the common piece of code between 'open' and 'close' operations. Changes since V2: 1)Updation of commit message and resubmition of proper patch set. Changes since V3: No change. Changes since V4: 1)Added a new funtion boot_part_access() to combine the common parts of 'mmc open' and 'mmc close' functionalities. 2)Used the generic function "mmc_boot_part_access()" instead of two functions "mmc_boot_open()" and "mmc_boot_close()". By doing so user can specify which boot partition to be accessed (opened / closed). Changes since V5: 1)Updated minor nits in response to review comments. Changes since V6: No change. Changes since V7: 1)The piece of code involved in open/close and resize of EMMC boot partition has been made conditional and is enabled only if the macro CONFIG_SUPPORT_EMMC_BOOT is defined. Changes since V8: 1)Updated the below in response to review comments a)Changed the type of input parameters from u32 to u8 for the function boot_part_access(). b)Updated the function call to use a constant value 1, like boot_part_access(mmc, 1, part_num, access). --- common/cmd_mmc.c | 109 +++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 files changed, 107 insertions(+), 2 deletions(-) diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 9f3d6c5..3a12c38 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -147,6 +147,36 @@ U_BOOT_CMD( "- display info of the current MMC device" ); +#ifdef CONFIG_SUPPORT_EMMC_BOOT +static int boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access) +{ + int err; + err = mmc_boot_part_access(mmc, ack, part_num, access); + + if ((err == 0) && (access != 0)) { + printf("\t\t\t!!!Notice!!!\n"); + + printf("!You must close EMMC boot Partition"); + printf("after all images are written\n"); + + printf("!EMMC boot partition has continuity"); + printf("at image writing time.\n"); + + printf("!So, do not close the boot partition"); + printf("before all images are written.\n"); + return 0; + } else if ((err == 0) && (access == 0)) + return 0; + else if ((err != 0) && (access != 0)) { + printf("EMMC boot partition-%d OPEN Failed.\n", part_num); + return 1; + } else { + printf("EMMC boot partition-%d CLOSE Failed.\n", part_num); + return 1; + } +} +#endif + static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { enum mmc_state state; @@ -258,8 +288,74 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) curr_device, mmc->part_num); return 0; - } +#ifdef CONFIG_SUPPORT_EMMC_BOOT + } else if ((strcmp(argv[1], "open") == 0) || + (strcmp(argv[1], "close") == 0)) { + int dev; + struct mmc *mmc; + u8 part_num, access = 0; + + if (argc == 4) { + dev = simple_strtoul(argv[2], NULL, 10); + part_num = simple_strtoul(argv[3], NULL, 10); + } else { + return CMD_RET_USAGE; + } + + mmc = find_mmc_device(dev); + if (!mmc) { + printf("no mmc device at slot %x\n", dev); + return 1; + } + if (IS_SD(mmc)) { + printf("SD device cannot be opened/closed\n"); + return 1; + } + + if ((part_num <= 0) || (part_num > MMC_NUM_BOOT_PARTITION)) { + printf("Invalid boot partition number:\n"); + printf("Boot partition number cannot be <= 0\n"); + printf("EMMC44 supports only 2 boot partitions\n"); + return 1; + } + + if (strcmp(argv[1], "open") == 0) + access = part_num; /* enable R/W access to boot part*/ + else + access = 0; /* No access to boot partition */ + + /* acknowledge to be sent during boot operation */ + return boot_part_access(mmc, 1, part_num, access); + + } else if (strcmp(argv[1], "bootpart") == 0) { + int dev; + dev = simple_strtoul(argv[2], NULL, 10); + + u32 bootsize = simple_strtoul(argv[3], NULL, 10); + u32 rpmbsize = simple_strtoul(argv[4], NULL, 10); + struct mmc *mmc = find_mmc_device(dev); + if (!mmc) { + printf("no mmc device at slot %x\n", dev); + return 1; + } + + if (IS_SD(mmc)) { + printf("It is not a EMMC device\n"); + return 1; + } + + if (0 == mmc_boot_partition_size_change(mmc, + bootsize, rpmbsize)) { + printf("EMMC boot partition Size %d MB\n", bootsize); + printf("EMMC RPMB partition Size %d MB\n", rpmbsize); + return 0; + } else { + printf("EMMC boot partition Size change Failed.\n"); + return 1; + } +#endif /* CONFIG_SUPPORT_EMMC_BOOT */ + } state = MMC_INVALID; if (argc == 5 && strcmp(argv[1], "read") == 0) state = MMC_READ; @@ -334,5 +430,14 @@ U_BOOT_CMD( "mmc rescan\n" "mmc part - lists available partition on current mmc device\n" "mmc dev [dev] [part] - show or set current mmc device [partition]\n" - "mmc list - lists available devices"); + "mmc list - lists available devices\n" +#ifdef CONFIG_SUPPORT_EMMC_BOOT + "mmc open <dev> <boot_partition>\n" + " - Enable boot_part for booting and enable R/W access of boot_part\n" + "mmc close <dev> <boot_partition>\n" + " - Enable boot_part for booting and disable access to boot_part\n" + "mmc bootpart <device num> <boot part size MB> <RPMB part size MB>\n" + " - change sizes of boot and RPMB partions of specified device\n" #endif + ); +#endif /* !CONFIG_GENERIC_MMC */ -- 1.7.3.rc2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot