Dear Fabio Estevam, > > > From: Fabio Estevam <fabio.este...@freescale.com> > > > > commit 5c2f444c9 (mxs: Reset the EMI block on mx23) changed the DDR > > voltage level, which causes mx23evk to fail to load a kernel. > > > > Put back the original values, so that mx23evk can boot a kernel again. > > > > Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> > > So, here are the results from M28EVK and MX23EVK: > > http://twilight.ponies.cz/MX23.tar.xz > http://twilight.ponies.cz/MX28.tar.xz > > What you can see (rather what's wrong on MX23): > - VDDA should be 1V5, but jumps over 2V and stabilizes at 1V7 > - VDDIO has some weird ripple where it goes to 3V5 > - VDDMEM is FUBAR
Ah btw this is stock 2013.04 Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot