Hi Mike, On Fri, May 3, 2013 at 12:23 AM, Mike Frysinger <vap...@gentoo.org> wrote: > On Thursday 02 May 2013 01:55:25 Sonic Zhang wrote: >> The gpio spec for bf54x and bf60x differ a lot from the old gpio driver for >> bf5xx. A lot of machine macros are used to accomodate both code in one >> gpio driver. This patch split the old gpio driver and move new gpio2 >> support to the generic gpio driver folder. >> >> - To enable gpio2 driver, macro CONFIG_ADI_GPIO2 should be defined in the >> board's config header file. >> - The gpio2 driver supports bf54x, bf60x and future ADI processors, while >> the older gpio driver supports bf50x, bf51x, bf52x, bf53x and bf561. >> - All blackfin specific gpio function names are replaced by the generic >> gpio APIs. > > the code in u-boot was written so as to make direct import from the kernel > trivial. that way there is only one code base to maintain -- the kernel. > last i looked, you hadn't split the drivers in the kernel, which means things > are now diverging.
Don't worry. I will do it in Linux kernel soon after this is merged into u-boot. Regards, Sonic _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
