Dear Josh Wu,

Josh Wu <josh...@atmel.com> writes:
>Add support for following features:
>  - nand boot, with PMECC 2bit ECC for 512 bytes sector
>  - SPI flash boot
>  - SD card boot
>  - LCD support
>
>Signed-off-by: Josh Wu <josh...@atmel.com>
>[fix -Wimplicit-function-declaration for at91_lcd_hw_init()]
>Signed-off-by: Andreas Bießmann <andreas.de...@googlemail.com>
>---
> MAINTAINERS                                       |    3 +
> arch/arm/cpu/arm926ejs/at91/Makefile              |    1 +
> arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c |  177 ++++++++++++++++
> arch/arm/cpu/arm926ejs/at91/clock.c               |    4 +-
> arch/arm/include/asm/arch-at91/at91_common.h      |    1 +
> board/atmel/at91sam9n12ek/Makefile                |   52 +++++
> board/atmel/at91sam9n12ek/at91sam9n12ek.c         |  228 ++++++++++++++++++++
> boards.cfg                                        |    3 +
> include/configs/at91sam9n12ek.h                   |  232 +++++++++++++++++++++
> 9 files changed, 699 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c
> create mode 100644 board/atmel/at91sam9n12ek/Makefile
> create mode 100644 board/atmel/at91sam9n12ek/at91sam9n12ek.c
> create mode 100644 include/configs/at91sam9n12ek.h

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bießmann
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to