Hi Benoît, On Wed, 15 May 2013 00:09:08 +0200 (CEST), Benoît Thébaudeau <benoit.thebaud...@advansee.com> wrote:
> Hi Albert, > > On Tuesday, May 14, 2013 10:02:58 PM, Albert ARIBAUD wrote: > > This change is only done where needed: some linker > > scripts may contain relocation symbols yet remain > > unchanged. > > > > __rel_dyn_start, __rel_dyn_end and __dynsym_start > > each requires its own output section; putting them > > in relocation sections changes the sections' nature > > which breaks relocation. > > > > Signed-off-by: Albert ARIBAUD <albert.u.b...@aribaud.net> > > [...] > > > diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib/relocate.S > > index 2f22c8c..818735c 100644 > > --- a/arch/arm/lib/relocate.S > > +++ b/arch/arm/lib/relocate.S > > @@ -54,12 +54,9 @@ copy_loop: > > /* > > * fix .rel.dyn relocations > > */ > > - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ > > - add r10, r10, r9 /* r10 <- sym table in FLASH */ > > - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ > > - add r2, r2, r9 /* r2 <- rel dyn start in FLASH */ > > - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ > > - add r3, r3, r9 /* r3 <- rel dyn end in FLASH */ > > + ldr r10, =__dynsym_start /* r10 <- sym table ofs */ > > + ldr r2, =__rel_dyn_start /* r2 <- rel dyn start ofs */ > > + ldr r3, =__rel_dyn_end /* r3 <- rel dyn end ofs */ > > 'ofs' -> 'in FLASH' in the comments of the 3 lines above. You are right that 'ofs' should have disappeared from the comments; but 'in FLASH' is right only for some U-Boots and wrong for others, as some U-Boots indeed run their board_init_f phase in FLASH, but others run in DDR and thus, copy themselves to DDR from DDR, not FLASH, notably those with an SPL. So the most correct commenting is using 'SRC' and 'DST'; will fix in V3 with 'sym table SRC addr' etc. > Best regards, > Benoît Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
