Dear Heiko, > -----Original Message----- > From: Heiko Schocher [mailto:h...@denx.de] > Sent: Saturday, May 04, 2013 2:02 PM > To: u-boot@lists.denx.de > Cc: Heiko Schocher; Dirk Eibach; Stefan Roese; Simon Glass; Piotr > Wilczek; Holger Brunck; Mike Frysinger; Stephen Warren > Subject: [PATCH v3 0/9] Bring in new I2C framework > > It seems the timing is coming, to bring this finally in mainline and > move boards over to the new i2c framework. > > Changes for v3 series: > > - Compiler collects the used i2c adapters in _u_boot_list_i2c, > so no need for defining the used i2c adpaters in the board config > file. > -> drop CONFIG_SYS_NUM_I2C_ADAPTERS and CONFIG_SYS_I2C_ADAPTERS > - Some adaptions for the keymile boards, so we can drop CONFIG_I2C_MUX > completely > - add ppc4xx_i2c driver, ported from Dirk Eibach > > Serie compiles clean on arm and powerpc > > Ported i2c drivers: > soft_i2c : from me, tested on some arm and powerpc boards > fsl_i2c : from me, only compile tested > tegra_i2c : ported from Simon Glass > ppc4xx_i2c: adapted from Dirk Eibach <dirk.eib...@gdsys.cc> > tested on (which board?) with 4 soft_i2c drivers > and one ppc4x_i2c driver. > > Cc: Dirk Eibach <dirk.eib...@gdsys.cc> > Cc: Stefan Roese <s...@denx.de> > Cc: Simon Glass <s...@chromium.org> > Cc: Piotr Wilczek <p.wilc...@samsung.com> > Cc: Holger Brunck <holger.bru...@keymile.com> > Cc: Mike Frysinger <vap...@gentoo.org> > Cc: Stephen Warren <swar...@wwwdotorg.org> >
I ported s3c24x0_i2c driver and tested this framework on Samsung tree on Trats2 board. Best regards, Piotr Wilczek _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot